Vibration Controls & Regulators

Vibration Control

Selection Guide | Cross Reference

Model 368

Pnuematic Vibraswitch
  • Acceleration sensitive—measures total destructive shock
  • 15 PSIG to 50 PSIG supply pressure
  • Adjustable set point range 0G to 4.5G
  • NEMA 4 weatherproof enclosure
  • Local manual or remote pneumatic reset

Model 365A

Malfunction Detector
  • Acceleration sensitive—measures total destructive shock
  • SPDT or DPDT contact options
  • Adjustable set point range 0G to 4.5G
  • Local or electric remote reset
  • Optional rain-shield for unprotected outdoor installations (Model 365)

Model 563A

Vibraswitch Monitor
  • Monitors up to eight 365 or 366 Vibraswitches
  • Adjustable start delay, 0 to 999 seconds
  • Adjustable monitor delay, 0 to 99 seconds
  • NEMA 4 or explosion-proof enclosures
  • Eight LED indicators

Model 566

Velocity Acceleration Vibration Monitor
  • Optional internal or remote mounted sensor
  • Velocity: 0 to1.5 in./sec or 0 to 3 in./sec
  • Acceleration: 0G to 5G or 0G to 10G
  • Output 4-20 mA DC
  • Two adjustable trip points
  • FM/CSA certified, NEMA 4 and explosion-proof enclosure

Model 571A

Loop-powered Vibration Transmitter
  • Measures acceleration or velocity in three different ranges
  • Reverse polarity protected
  • Two-wire loop-powered (14-30 VDC)
  • 4-20 mA DC output
  • Compact design, 1.12 in. diameter, 2.80 in. height
  • 1/4-28 stud mounting
  • Two-pin electrical connection mates with standard MIL-C-5015 socket with splash-proof boot

EURO366

Vibraswitch Malfunction Detector
  • Flame Proof (Explosion Proof) – EEx d II B/C T6 IP66 T85°c – CESI03ATEX
  • Self Powered – No external power necessary
  • Adjustable set point range 0G to 4.5G
  • Local or electric remote reset
  • Minimum Maintenance – No moving parts except when set-point is exceeded

Model 366

Vibraswitch Malfunction Detector
  • Acceleration sensitive—measures total destructive shock
  • SPDT or DPDT contact options
  • Adjustable set point range 0G to 4.5G
  • Local or electric remote reset
  • Optional space heater to prevent condensation

Robust Self-Actuated Regulators

Selection Guide | Cross Reference

MODEL RT-1001B1

Temperature Regulator
  • Approx. 60°F spans from -20°F to 480°F
  • Over-temperature protection is standard
  • Chevron “lifetime” stem packing made of Teflon
  • Quick-detach valve stem construction permits easy valve change
  • Valves in a wide range of sizes, actions, styles, materials, etc.

MODELS RT-1003/RT-1009

Temperature Regulator – Liquid & Gas
  • Large two-ply, seamless Robertshaw bellows used for long life and extra power
  • Over-temperature protection is a standard feature
  • Chevron “lifetime” stem packing made of Teflon
  • Quick-detach valve stem construction permits easy valve change
  • Sturdy construction with cast iron frame

MODEL RT-1001T2

Tank Temperature Regulator
  • Two-ply, seamless Robertshaw bellows for extra power and long life
  • Standard 3/4 in. sensing bulb to fit most installations
  • Over-temperature protection is standard
  • Chevron “lifetime” stem packing made of Teflon
  • Quick-detach valve stem construction permits easy valve change

MODELS RT-1006B1/RT 1007A1

Temperature Regulator – Non-indicating Design
  • Fail-safe regulator
  • Extra-large, two-ply, seamless Robertshaw bellows for long life and extra power
  • Valves in a wide range of sizes, actions, styles, materials, etc.
  • Chevron “lifetime” stem packing made of Teflon or EPT rubber U-Cup for water service
  • Quick-detach valve stem construction permits easy valve change

RT-200 SERIES

Temperature Regulator
  • Accurate Control
  • Single-Seated Valve
  • Packless Construction
  • Graduated Setpoint Adjustment
  • Setpoint Lock Feature

MODEL RT-1010A

Temperature Regulator – Balanced, Three-Way Design
  • Extra-large, two-ply, seamless bellows
  • The valve can be manually positioned by a hand crank
  • EPT Rubber U-Cup packing is standard
  • Quick-detach valve stem construction permits easy valve change
  • Sturdy construction with brass frame

MODELS I-1284/I-1285

Thermostatic Valves
  • Valve sizes are 2 in. through 6 in. class 150 cast bronze bodies; 3 in. through 6 in. class 150 cast steel bodies
  • Mid-flow operating temperatures between 60°F and 200°F are available in 10°F steps

MODEL RP-1072

Vacuum and Pressure Regulator
  • Large, two-ply, seamless Robertshaw bellows for long life
  • Chevron “lifetime” stem packing made of Teflon
  • Quick-detach valve stem construction
  • Sturdy cast iron frame
  • Hand-wheel type set point adjustment

MODELS RP-1065/RP 1066

Diaphragm Actuated Pressure Regulator
  • All valves are stainless steel trimmed
  • Choice of set point control ranges
  • Nylon-reinforced, molded Buna-N diaphragm
  • Quick-disconnect valve stem feature
  • Ball-bearing adjusting wheel

MODEL HA-361

Instantrol Water Heaters
  • Reliable, Robertshaw self-actuated regulators
  • Sized sensing bulb housing
  • ASME “code”
  • Steam strainer
  • Inverted bucket type steam trap
  • Action adjustment valve, adjustable mounting feet

MODEL ZT-100

Instantrol Water Heaters – Shut-off System
  • Single-seated diaphragm control valve
  • Temperature sensing pilot with a manual relief feature
  • Combination pressure regulator-strainer- relief valve
  • Adjustable set point spans are in approximately 30°F increments between 100°F and 210°F
  • Control valve sizes are 3/4 in. through 2 in.